F065
Diameter Nominal Paip Luar:
- Disyorkan oleh Piawaian Perusahaan Peralatan Kriogenik HL. Ia juga boleh dihasilkan mengikut keperluan pelanggan.
- Tekanan Reka Bentuk:
- Disyorkan ≤ 16 bar. Atau pilih Jenis Sambungan Kimpal (≤40 bar).
- Bahan Paip Luar
Tanpa keperluan khas, bahan paip dalam dan paip luar akan dipilih sama.
3.1.3 Jenis Sambungan Kimpalan
odel
Sambungan
Jenis
Diameter Nominal Paip Dalam
Tekanan Reka Bentuk
Bahan
Paip Dalam
Piawai
Catatan
W010
00X
Jenis Sambungan Dikimpal untuk Hos Fleksibel Bertebat Vakum Statik
DN10, 3/8"
8~40 bar
Keluli Tahan Karat Siri 300
ASME B31.3
| V | DN20, 3/4" | DN25, 1" | Diameter Nominal Paip Luar: | |
| Tekanan Reka Bentuk | Bahan Paip Dalam. | A ialah 304, | DN40, 1-1/2" | C ialah 316, |
| D ialah 316L, | HLHS | HLHS | W015 | 00X |
| DN15, 1/2" | No | No | HLHS | Tekanan Reka Bentuk |
| Nominal Diameter of Inner Pipe | 00X | HLHS | W025 | 00X |
| Design Pressure | HLHS | DN32, 1-1/4" | 00X | DN32, 1-1/4" |
| HLHS | HLHS | HLHS | DN40, 1-1/2" | HLHS |
| Disyorkan ≤ DN25 atau 1". Atau pilih Jenis Sambungan Bayonet Vakum dengan Bebibir dan Bolt (daripada DN10, 3/8" hingga DN80, 3"), Jenis Sambungan Kimpalan (daripada DN10, 3/8" hingga DN150, 6") | 00X | |||
| DN50, 2" | HLHS | |||
| Material | 300 Series Stainless Steel | |||
| Piawai | LN2HLHS2W080 | |||
00X
DN80, 3"
| LHSW100 | |
| 00X | |
| DN100, 4" |  |
LHSW125
| 00X | DN125, 5" | LHSW150 | 00X | DN150, 6" | Diameter Nominal Paip Luar: |
| Disyorkan oleh Piawaian Perusahaan Peralatan Kriogenik HL. Ia juga boleh dihasilkan mengikut keperluan pelanggan. | Bahan Paip Luar | DN25, 1" | DN25, 1" | DN25, 1" | DN25, 1" |
| Jenis | DN25, 1" | DN25, 1" | DN25, 1" | DN25, 1" | |
| Piawai | DN25, 1" | DN25, 1" | DN25, 1" | DN25, 1" | |
| DN10, 3/8" | DN25, 1" | DN25, 1" | DN25, 1" | DN25, 1" | |
| Tekanan Reka Bentuk. | / | DN25, 1" | DN25, 1" | / | |
| Bahan Paip Dalam. | / | DN25, 1" | DN25, 1" | / | |
| C ialah 316, | / | DN25, 1" | DN25, 1" | / | |
| HLHS | / | DN25, 1" | DN25, 1" | / | |
| DN15, 1/2" | / | DN25, 1" | DN25, 1" | / | |
| 00X | / | / | DN25, 1" | / | |
| HLHS | / | / | DN25, 1" | / | |
| 00X | / | / | DN25, 1" | / |
Diameter Nominal Paip Dalam:
| Disyorkan ≤ DN25 atau 1". Atau pilih Jenis Sambungan Bayonet Vakum dengan Bebibir dan Bolt (daripada DN10, 3/8" hingga DN80, 3"), Jenis Sambungan Kimpalan (daripada DN10, 3/8" hingga DN150, 6") | Diameter Nominal Paip Luar: |
| Disyorkan oleh Piawaian Perusahaan Peralatan Kriogenik HL. Ia juga boleh dihasilkan mengikut keperluan pelanggan. | Tekanan Reka Bentuk: |
| Disyorkan ≤ 16 bar. Atau pilih Jenis Sambungan Kimpal (≤40 bar) | Bahan Paip LuarTanpa keperluan khas, bahan paip dalam dan paip luar akan dipilih sama.3.2 Sistem Paip Bertebat Vakum Dinamik3/S |
| 3.2.1 Jenis Sambungan Bayonet Vakum dengan Pengapit | odel |
| Sambungan | Jenis |
| Diameter Nominal Paip Dalam | Tekanan Reka Bentuk |
| Bahan | Paip Dalam |
| Piawai | Catatan |
HDB01008
Jenis Sambungan Bayonet Vakum dengan Pengapit untuk Hos Fleksibel Bertebat Vakum Dinamik
lDN10, 3/8"
l8 bar
| Keluli Tahan Karat Siri 300 C ialah 316, | Bahan Paip Dalam. | |
| A ialah 304, | B ialah 304L,C ialah 316,D ialah 316L, | |
| E ialah yang lain. | HLH | DB01508 |
| DN15, 1/2" | Tekanan Reka Bentuk: | Tekanan Reka Bentuk: |
| DN20, 3/4" | Tekanan Reka Bentuk: | Tekanan Reka Bentuk: |
| DN25, 1" | Tekanan Reka Bentuk: | Tekanan Reka Bentuk: |
| Diameter Nominal Paip Luar: | Tekanan Reka Bentuk: | Tekanan Reka Bentuk: |
Disyorkan ≤ 8 bar. Atau pilih Jenis Sambungan Bayonet Vakum dengan Bebibir dan Bolt (≤16 bar), Jenis Sambungan Kimpalan (≤40 bar)Bahan Paip LuarTanpa keperluan khas, bahan paip dalam dan paip luar akan dipilih sama.
Keadaan Kuasa:
HL-HX-X-Tapak tersebut perlu membekalkan kuasa kepada pam vakum dan memaklumkan HL Cryogenic Equipment maklumat elektrik tempatan (Voltan dan Hertz).-00-X
3.2.2 Jenis Sambungan Bayonet Vakum dengan Bebibir dan Bolt
odel
Sambungan
Jenis
Diameter Nominal Paip Dalam
Tekanan Reka Bentuk
Bahan
Paip Dalam
Piawai
Catatan
Nominal Diameter of Inner Pipe
00X
8~16 bar
DN10, 3/8"
8~16 bar
Keluli Tahan Karat Siri 300
Design Pressure
Tekanan Reka Bentuk.
08 ialah 8bar,
16 ialah 16bar.
Bahan Paip Dalam.
A ialah 304,
B ialah 304L,
C ialah 316,
D ialah 316L,
E ialah yang lain.
F015
00X
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| HLHSF040X | Siri Pemisah Fasa Bertebat Vakum | DN10, 3/8" | Armenia
| 300 Series Stainless Steel | ASME B31.3 | X: Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
| PerancisDiameter Nominal Paip Luar:X | DN15, 1/2" | |||||
| PerancisDisyorkan ≤ 16 bar. Atau pilih Jenis Sambungan Kimpal (≤40 bar).X | DN20, 3/4" | |||||
| PerancisKeadaan Kuasa:X | DN25, 1" |
Nominal Diameter of Inner Pipe: Recommended ≤ DN25 or 1". Or selects the Vacuum Bayonet Connection Type with Flanges and Bolts (from DN10, 3/8" to DN80, 3"), Welded Connection Type (from DN10, 3/8" to DN150, 6")
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Design Pressure: Bahasa Iceland
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| Perancis08 ialah 8bar,00X | dan 25, 32, 40. | DN10, 3/8" | 8~16 bar | 300 Series Stainless Steel | ASME B31.3 | 00: Design Pressure. 08 is 8bar, 16 is 16bar.
X: Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
| PerancisBahasa Samoa00X | DN15, 1/2" | |||||
| PerancisSindhi00X | DN20, 3/4" | |||||
| PerancisTajik00X | DN25, 1" | |||||
| PerancisBahasa Thai00X | DN32, 1-1/4" | |||||
| PerancisUzbekistan00X | DN40, 1-1/2" | |||||
| PerancisXhosa00X | DN50, 2" | |||||
| PerancisZulu00X | DN65, 2-1/2" | |||||
| PerancisOriya00X | DN80, 3" |
Nominal Diameter of Inner Pipe: Recommended ≤ DN80 or 3". Or selects the Welded Connection Type (from DN10, 3/8" to DN150, 6"), Vacuum Bayonet Connection Type with Clamps (from DN10, 3/8" to DN25, 1").
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Design Pressure: Keadaan Kuasa:
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| HLHS00X00X | DN10, 3/8" | DN10, 3/8" | Keluli Tahan Karat Siri 300 | 300 Series Stainless Steel | ASME B31.3 | 00: Design Pressure 08 is 8bar, 16 is 16bar, and 25, 32, 40.
X: Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
| PerancisDN15, 1/2"00X | DN15, 1/2" | |||||
| PerancisDN20, 3/4"00X | DN20, 3/4" | |||||
| PerancisDN25, 1"00X | DN25, 1" | |||||
| PerancisW03200X | DN32, 1-1/4" | |||||
| PerancisW04000X | DN40, 1-1/2" | |||||
| PerancisW05000X | DN50, 2" | |||||
| PerancisW06500X | DN65, 2-1/2" | |||||
| PerancisW08000X | DN80, 3" | |||||
| HHos Jaket Vakum00X | DN100, 4" | |||||
| HInjap Pengatur Aliran Oksigen Cecair China00X | DN125, 5" | |||||
| HHarga Borong China China Tangki Standard ISO 2...00X | DN150, 6" |
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| HLHSSistem Pam Vakum Dinamik00X | Siri Pemisah Fasa Bertebat Vakum | DN10, 3/8" | 8~16 bar | 300 Series Stainless Steel | ASME B31.3 | 00: Design Pressure. 08 is 8bar, 16 is 16bar.
X: Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
| PerancisWhatsapp00X | DN15, 1/2" | |||||
| PerancisWeChat00X | DN20, 3/4" | |||||
| PerancisJerman00X | DN25, 1" |
Nominal Diameter of Inner Pipe: Recommended ≤ DN25 or 1". Or selects the Vacuum Bayonet Connection Type with Flanges and Bolts (from DN10, 3/8" to DN80, 3"), Welded Connection Type (from DN10, 3/8" to DN150, 6")
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Design Pressure: Yunani
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
Bahasa Denmark
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| HLLaoX | Vacuum Bayonet Connection Type with Clamps for Dynamic Vacuum Insulated Flexible Hose | DN10, 3/8" | Armenia
| 300 Series Stainless Steel | ASME B31.3 | X:Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
| HLHEstoniaX | DN15, 1/2" | |||||
| HLHFrisiaX | DN20, 3/4" | |||||
| HLHGujaratiX | DN25, 1" |
Nominal Diameter of Inner Pipe: Recommended ≤ DN25 or 1". Or selects the Vacuum Bayonet Connection Type with Flanges and Bolts (from DN10, 3/8" to DN80, 3"), Welded Connection Type (from DN10, 3/8" to DN150, 6")
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Design Pressure: Bahasa Iceland
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
Power Condition: The site needs to supply power to the vacuum pumps and inform HL Cryogenic Equipment the local electricity information (Voltage and Hertz).
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| HLMalayalam00X | Maori | DN10, 3/8" | 8~16 bar | 300 Series Stainless Steel | ASME B31.3 | 00: Design Pressure. 08 is 8bar, 16 is 16bar.
X: Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
| HLHDBahasa Samoa00X | DN15, 1/2" | |||||
| HLHDSindhi00X | DN20, 3/4" | |||||
| HLHDTajik00X | DN25, 1" | |||||
| HLHDBahasa Thai00X | DN32, 1-1/4" | |||||
| HLHDUzbekistan00X | DN40, 1-1/2" | |||||
| HLHDXhosa00X | DN50, 2" | |||||
| HLHDZulu00X | DN65, 2-1/2" | |||||
| HLHDOriya00X | DN80, 3" |
Nominal Diameter of Inner Pipe: Recommended ≤ DN80 or 3". Or selects the Welded Connection Type (from DN10, 3/8" to DN150, 6"), Vacuum Bayonet Connection Type with Clamps (from DN10, 3/8" to DN25, 1").
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Design Pressure: Recommended ≤ 16 bar. Or selects Welded Connection Type (≤40 bar).
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
Power Condition: The site needs to supply power to the vacuum pumps and inform HL Cryogenic Equipment the local electricity information (Voltage and Hertz).
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| HLHDW01000X | Welded Connection Type for Dynamic Vacuum Insulated Flexible Hose | DN10, 3/8" | 8~40 bar | Stainless Steel 304, 304L, 316, 316L | ASME B31.3 | 00: Design Pressure 08 is 8bar, 16 is 16bar, and 25, 32, 40. .
X: Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
| HLHDW01500X | DN15, 1/2" | |||||
| HLHDW02000X | DN20, 3/4" | |||||
| HLHDW02500X | DN25, 1" | |||||
| HLHDW03200X | DN32, 1-1/4" | |||||
| HLHDW04000X | DN40, 1-1/2" | |||||
| HLHDW05000X | DN50, 2" | |||||
| HLHDW06500X | DN65, 2-1/2" | |||||
| HLHDW08000X | DN80, 3" | |||||
| HLHDW10000X | DN100, 4" | |||||
| HLHDW12500X | DN125, 5" | |||||
| HLHDW15000X | DN150, 6" |
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
Power Condition: The site needs to supply power to the vacuum pumps and inform HL Cryogenic Equipment the local electricity information (Voltage and Hertz).
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| HLHDT01000X | Vacuum Bayonet Connection Type with Clamps for Dynamic Vacuum Insulated Flexible Hose | DN10, 3/8" | 8~16 bar | 300 Series Stainless Steel | ASME B31.3 | 00: Design Pressure. 08 is 8bar, 16 is 16bar.
X: Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
| HLHDB01500X | DN15, 1/2" | |||||
| HLHDB02000X | DN20, 3/4" | |||||
| HLHDB02500X | DN25, 1" |
Nominal Diameter of Inner Pipe: Recommended ≤ DN25 or 1". Or selects the Vacuum Bayonet Connection Type with Flanges and Bolts (from DN10, 3/8" to DN80, 3"), Welded Connection Type (from DN10, 3/8" to DN150, 6")
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Design Pressure: Recommended ≤ 16 bar. Or selects the, Welded Connection Type (≤40 bar)
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
Power Condition: The site needs to supply power to the vacuum pumps and inform HL Cryogenic Equipment the local electricity information (Voltage and Hertz).
